

TwinSource Rack Mount Static Transfer Switch |
||
The SCR based solid state TwinSource rack mount static transfer switch is a single phase 2 pole rack mount static static switch. TwinSource rack mount static switch currently comes in 30, 40, and 50A ratings in all voltages worldwide. We have recently introduced the FOUR POLE, Three phase, Four wire rack mount transfer switch that come with the same design features as the popular single phase rack mount transfer switch. This state of the are rack mount static switch is also available in 208/120V ( for US Applications Only). The three phase, FOUR POLE, four wire Twinsource rack mount static switch is available in 55A, 20KW for higher power 3 phase application. In a rack mount static switch (STS) application or any static switch the fourth pole is necessary to disconnect/reconnect the neutrals as well as the three phases in a power transfer. (Data Sheet)
TwinSource Static transfer Switch 30-50A 2 Pole & 4 Pole
TwinSource 30A MagLatch Automatic Transfer Switch Above mentioned TwinSource rack mount static switch (STS) and rack mount transfer switch are designed to maintain your critical load on the preferred primary power source as long as the it meets the pre set power quality parameters. In case the power quality of primary source goes outside the specified parameters, the TwinSource rack mount static switch (STS) or rack mount transfer switch will automatically transfer the critical load to the secondary power source given the alternate source meets the power quality parameters required by the load. Rack mount static transfer switch will perform this transfer in less than quarter cycle and the maglatch rack mount transfer switch with perform the transfer in half (1/2) cycle. The rack mount transfer switch does this safely with no risk of cross connecting the power sources and dropping the critical load. The primary power source of the rack mount static transfer switch can be user selected by a selector button on the rack mount static switch or maglatch rack mount transfer switch or by remote access via the RS 485 port. Twinsource rack mount static transfer switch and rack mount transfer switch is programmed to transfer back to the primary power source once the power quality is restored. Again the retransfer will happen quickly and safely without arching or cross connecting the sources. The typical problem with APC transfer switch is arching during the transferring back to the primary source. Please call us and we will explain why this problem exists in the APC transfer switch and how at Twinsource we have eliminated this problem in our rack mount transfer switch.
|
||
| TwinSource Rack Mount Static Transfer Switch (STS)is the best in the industry bar none. We have demonstrated 60,000,000 hours of critical load operation without any failure. This is an impressive accomplishment given the sophisticated and demanding customer base that will not accept anything but the best performance. TwinSource has a extensive international installed base in US, UK, Singapore, Korea, Hong Kong, Dubai, and other locations worldwide. For more information please do not hesitate to contact us we will be happy to assist you is planning and designing the best power protection system for your critical load. |